Joe Parr Pyramid Research (rotating pyramid induces an orb around it and levitates)!

The Power Of A Pyramid!

Pyramid with 50 degree angles with 4 sides creating enormous amount of EMFS on the meter.

This machine is very primitive. It's a wooden box containing three devices. There are two four-sided 5in. squared base pyramids that are 5in. high (see photo #3). The third device is a sphere which is 5in. in diameter (see photo #4). All three devices are made of solid iron and collectively weigh 40lbs. (see photo #5). The box is constructed of solid wood and fastened with wooden pegs and glue (see photo #6). It is 3in. thick on all sides and weighs 60 lbs. Extended from the box are four iron terminals.

The three devices are installed in the box (see photo #7). The box serves as a frame supporting the three devices in a fixed “bow-tie” configuration. On either side of the iron sphere, the points of the iron pyramids are as close to the sphere as possible without touching (see photo #8).

To operate the machine, orient the box in a north/south direction (see photo #9 and the last video). The box is then raised at least 3ft. high or insulated from the earth. Both pyramid terminals are connected to iron cables that extend 50ft. long, laying on the ground. An iron cable buried 8ft. into the ground connects the terminal at the bottom of the sphere to the earth. The terminal at the top of the sphere connects to an iron rod that is mounted on a wooden handle, to insulate the operator (see photo #11 and the last image). Finally, secure the cover to the box (see photo #10).

Gravock