Free Energy | searching for free energy and discussing free energy

So the "out of line" coil here is the 15 turn coil ringing at 13 Mhz,  resonating at 1.667 Mhz.

Apply that frequency to copper strips and see if there is sine wave on 15 turns coil.
If that happens, look for resonant harmonics highest ringing peaks on 50 turns coil.

Here are practical schematics - 150W-1 KW Tiger's device with direct explanation from Tiger (Kazakhstan) Please ovoid  inventor;s tHiffs!
no offence - just practical way to be free!!!
http://www.energeticforum.com/renewable-energy/9781-tigers-device-0-150-1kwt-replicant-3.html#post167057

So to summarize what you are saying:
You are saying that Tiger's design was in fact stolen by STAARS
and that he is not part of their team at all?
Except you mean something else with the nearly undecipherable expression "inventor;s tHiffs!"
You claim to be in contact with Tiger.
Have you personally asked him that this is all being done without his approval?
I mean i am trying to understand why you are coming out here so boldly and make the
serious accusations of theft of intellectual property except you are damn sure that
your accusations have been confirmed by Tiger himself.

Not to be misunderstood, i do NOT believe that Stivep and his team would do
something like that. Why should they?
Would just be interesting to see why there is such a controversy about this matter ...
According to T-1000, Tiger is part of the team and Stivep mentions his name
in every video. So there is no attempt going on to hush his contribution down or anything.

I also have good contact with Tiger.
And Ganza,please stop making conflict from nothing.

http://freeenergylt.narod2.ru/aidas/Aidas_SHEMATIC_2.jpg is working really on different principles what you spit over forums into our faces.

OK - then give me back ability to post attching shcematics here! Why I m not able to attach small jpegs (60 Kbt)?
After that I will show a practical schematics of Tigers device for everyone to be able to compare themselves!

Tiger is too busy with new devices and he doesn't care about what you do with his originally replicated device therefore he isn't in connection with what I talking with members here. But for me it is important that his name  still be known in connection with works of other replicators!

I have opened a web for Tiger's devices - be welcome!  You never stop the Truth!
http://germaschka2011.narod2.ru/

In bucking mode two windings are connected serially in such manner that the voltages induced in them are subtracted.
In reinforcing mode two windings are connected serially in such manner that the voltages induced in them are added.

Also, windings connected in the reinforcing mode exhibit much higher self inductance than in the bucking mode.

Verpies, Would mind drawing and labeling that explanation please? You know a picture...
TIA

Man oh man, I thought this capacitor was discharged but when I put my hand on it whammo. What a shock. I then go to short the cap but forgot to remove my volt meter from the cap and no the VM does not work. Opening and inspecting the VM, I noticed these two red capacitors that have some writing on them as follows;

NDC
1-2
KV

But both of these caps have a slit going from the center top to about the center of the cap. The slit could be man made because you can see through the slit or this could be caused by the cap discharge. f anyone know about such capacitors and if a slit is normal or not, please advise. The VM is a Fluke 73. I have two more but wanted to try and fix this is possible.

Regarding the experimenting, I have finally found a schematic of my flyback and there are diodes in the HV side. Damn it. Will have to source another one.

I have done the Fcore test with sine wave that gives me best resonance at 7.62 MHz on the 15 turns.
But when I try the F50-turn, I get good resonance with sine or square wave at 26.7 and 21.9 MHz, but can only get resonance with a square wave at 5.72 and 2.00 MHz. Any lower and nothing.

wattsup

PS: Anyone using Firefox (7.01 and latest version 8.0) notice that when making a post, the bold or other buttons are not showing and the "more attachments" does not work so only adding one attachment is possible.

I can't even attach the image. So I put it here if anyone can check it out.
http://purco.qc.ca/ftp/Inventors/Tariel-Kapanadze/wesley/volt-meter/

WHATS UP, Wattsup, sorry  . Those are not caps purse, they were before the manufacturer turned them into spark gaps. looks like the spike went way over
2kv and may have blown the brains out of the meter So sorry

Verpies, Would mind drawing and labeling that explanation please? You know a picture...

Yes, it's too trivial.
There are only two ways to connect two windings serially.

...
In any case, if two measurements are made, firstly with the LF winding and secondly with the HF winding, then any frequency peak that "moves" between these two measurements can be attributed to the artifacts of the sensing winding/coil.
Conversely, any frequency peak that "stays" in the same position can be attributed to the core and Transverse Coil (copper strips).

Totally agree with you as it makes total sense.

By pulsing the copper strip, and assuming ferrite has a core ringing (singing) frequency, then anything winded on it should be able to pick it up ("hear it"). Obviously the more turns ones will collect it stronger (but will have even stronger their own LC peaks and harmonics messing things up).

...
@ all

A solution to deal one and for all with this problem is to white noise the copper strip (as possitioned originaly) and to to have another copper strip (or 1-2 turns winding) wound as a normal winding. No other windinng added till then.
The first one will act as transmiter the second as a receiver.

Since their natural L (C + C2 of SG parasitic capacitance or C3 of spectrum analyzer better know it) resonant peaks will be in high Mhz-s range (that can be calculated and spotted on any decent specrum analyzer) go search for a lower one in the 1-2 Mhz range that normally it should not be there and its amplitude cannot be justified.

Then you have your "bell's frequency". After that explicit find, proceed.

ps: Personally i plan at gettng my hands upon old TV sets yokes more or less similar to the STAAAR team used. Its well known that the larger a piece of anything, the slower it resonates.

Hi guys,
I'm new here, not native english speaker, so I have some problems to understand evrything.
I would like to make a replication of your device and do some testing and here is first problem - wich feritte shoul I use. I have two of them, one has lower hight/biger diameter, the other biger hight/lower diameter than one that you used. (I added link to picture of two ferittes)
https://docs.google.com/open?id=0B7AR9JIjkyDoYWU3NTQ4NmMtMGEyMS00NDFhLTkzMDQtZmY5Nzg2YTJlNTdj

Do you maybe have any diagram of feritte caracterictics?

Thank you for your open source contribution. I support you with all my heart.