Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[resonanceman]

You need to understand that there is no special motor, no special wiring, just off the shelf motor and generator head with geared-up flywheel weights to store the energy temporarily.....don't waste your time.

Rich

Rich

The  guy  I saw on TV years  ago  as far as I know  only used  one  set  of  flywheels  and a  bouncing belt

I  don't  remember   many details  except  he  asked the camera to zoom in on the  belt 

I remember  2 vertical bars  with a flywheel on  each  side ....... and  the  belt in between .
I remember  that the bars  formed  something like  a slot  that the  belt  was in ......at times it  looked like it was  trying to pop  out of the slot .

I don't  remember seeing  more flywheels  behind  the others .
I don't remember the motor and  generator  but they must have been at the bottom  of the  machine


I  remember the  belt  because of the  story  he told   about  finding  out about it  by accident .


I   don't have any idea what happened to  the guy or his  device,  as far as I know he was only on TV that one tim


 

I do remember him talking   about  how  hard it  was  trying to get people  to take his  invention seriously  and how  all the  engeneer types  thought  that the belts would have to be tight  for it to  run right .


gary

[resonanceman]

This the last message I received from Chas:

From: chas campbell
To: Patrick Kelly
Sent: Wednesday, October 31, 2007 12:37 PM
Subject: simple test

Patrick as I told you in a recent e mail as soon as posiable I would build a unit to test using your simple idea , I am now delighted to let you know the results were as follows using the same .075 motor that has a speed of 1430 RPM and driving my 3.5 KVA alternator I was able to loop the motor back to one of the outlets on the alternator without loosing any speed I was then able to plug into the second outlet a bed lamp with a 75w bulb and yes they both  worked.The unit I assembled has a flywheel that is unbalanced as a mater of fact its like standing in front of a fan, one of the bearings over heated and no mater how I tried I could not stop the belt slipping on the motor . so a hell of a lot of improvments could be made. I do hope you will continue to show interest in my project and any simple advice you can give me would be wellcome .Chas   

This  to me  looks evidence that  like the  guy on TV  was right 
The  power has to be pulsed ........and it works  even if the pulsing is  being caused by a bad bearing.

gary 

[resonanceman]

   

This  to me  looks evidence that  like the  guy on TV  was right 
The  power has to be pulsed ........and it works  even if the pulsing is  being caused by a bad bearing.

gary 

here  is another  link  about   the Chas Campbell   device .

http://www.free-energy-info.co.uk/Chapter4.pdf

page  2  tells  about  how  the  belts  have to be loose  so that it pulses  the  flywheels


there are other ways  to create the pulses  further down .


gary

[TheOne]

I found a new video of Chas on youtube today:

http://www.youtube.com/watch?v=Hcbi0p-PtHM

No more update about this?

[resonanceman]

I found a new video of Chas on youtube today:

http://www.youtube.com/watch?v=Hcbi0p-PtHM

No more update about this?

TheOne

I think that video is  copy of one of the  videos  that  this  thread was started to investigate. 

gary