Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[ashtweth_nihilisti]

Another R and D idea given to me By an engineer on the board.

"Hi Ash,

So what we effectively have is a mechanical capacitor!!!

I kind of understood that when he said any ratios would be OK. Well instead of this mechanical setup you can use Ultra capacitors to do the same job!! Connect the RV to a generator and store the excess generation on to an ultra cap and this can be used when ever there's a sudden additional demand!!
Have you seen this company called Eestor...theyve developed an ultra capacitor which works as a battery and they call it a battery"EEStor unit could run on the equivalent of 45 cents per gallon, driving 500 miles on $9 worth of electricity after just five minutes to charge."
http://www.autoblog.com/2006/09/21/eestor-ceramic-electric-motor/
 
May be we could use an RV'd Chas setup and charge these sort of batteries and run cars!!    Very feasible idea as the charge duration is short!  I think RV-Chas system would be more feasible to be used for uneven loads of short duration rather than continuous loading...I think it will be COP>1 when used this way! "-End

[shruggedatlas]

As is, motor/gen/fly wheel set up not OU in the configuration he has
more investigation is needed to access the potential in our opinion based on my R and D into Gravity machines and the expertise of the engineers i am talking to ATM, i find that we can try other configs to EVALUATE the potential further and 'close the book'.

BUT

His gravity wheel looks as the only thing stopping it from moving continuous is the materials he used,
Instructions for all are nearly ready.

Well that really is too bad.  I was hoping he had something.  But if the flywheel does not work as claimed, why do you have any faith in the gravity wheel?  The "materials" excuse is really setting off a red flag.  So many people have used that one.

[Joh70]

that sounds like the big wheel has no function. i don't think, this makes sence. there is something missing in the proof. but we will see...

[ashtweth_nihilisti]

allot of people seem content to close the book before we try the final test on his flywheel set up..

Every one is an individual, Chas's situation is really what i say as i examined the wheel. And saw it turning and witnessed it stopping ONLY as a result of it wobbling and causing the balls to fall off their rollers, so i would be patient and wait for the video and make up your own mind.
Chas showed us you will see on the video that balls going in with out wobbling makes the wheel keep turning!

it is made of tin, and wood, so not robust, you can improve it as he has disclosed full instructions on how to do it, i expect the editing to be finished tomorrow.

[b0rg13]

how about drawing a pic .. or photo......or somthing basic ?...

[ashtweth_nihilisti]

Chas provided a drawing of how the wheel concept works, and also we have done a close up of the wheel and its components all is on the video, Chas himself is on camera explaining it please be patient whilst we edit the footage for the board thanks

[helmut]

I thought the description I wrote explained it pretty well. I can only assume that either you didn't read the description, or you just don't understand it.

There is nothing wrong in my picture. The only way there would be drag is if all of the wheels are not the exact sizes necessary to turn in perfect unison.

D is a ring and has no axle. It sits freely within A. The weight of D, freely resting on one side of A keeps A out of balance and constantly turning clockwise. Do you understand now?

What I need are the exact ratios for all the wheels; taking into consideration the fact that A contacts D on the inside surface and B on the outside surface. This means that the thickness of A must be calculated into the ratios.

(http://i23.photobucket.com/albums/b375/HollywoodTom/4waygw2.jpg)

Yes, I am very willing to try it.

Is there anyone here who is good at math who can tell me what size all the wheels have to be so that they will turn in unison?

Does anyone here know math?
[/quote]
@Gravitar
Sorry but i dont know to much about maths,to make it work by calculation.

I whish so much,that your konstruction enables us. to use Gravity as a endless driving Force.
But if i turn the screen to about 30 to 45 degrees to the right,then it seems,that the Wheel D  rests in a balanced position,and no force ist drifing it forward.

Helmut

[Humbugger]

"And i still stand by our conclusion saying MORE investigation is needed before we close the book Hum, and i still think some of your 'inquiries' some times GEL like your working for the oil companies.And attitude of closing the book on him is not sound."


@Ashtweth Nihilist

I voluntarily dropped out of further posts on this thread because you whiningly blamed me for causing big delays in your important work by bringing up obvious technical concerns and ethical issues regarding long-standing and clearly false published claims of excess energy production.  Why are you still addressing me in your posts if you do not wish to continue a discourse? 

I think it is downright sleazy of you to continue publicly accusing me of working for big oil, which is entirely false and has no basis whatsoever and is a weak low-life attempt at maliciously discrediting my completely objective, technically correct and clearly rational observations. 

You may feel free to insult me all you like if it makes you feel better or if you think it helps to prove your case.  I can handle it.  I'm tough.  I see you have plenty of practice at publicly insulting innocent people who simply ask you to clarify your statements and stay on subject:

http://www.iidb.org/vbb/showthread.php?p=202405#post202405

I am a retired electronics equipment designer and inventor with 40 years of successful commercial and industrial product releases and two granted US patents.  I have no interest in helping to suppress anything that works as advertised.  I do rather enjoy blasting away at dodgey fakery and lies, though!

Humbugger


P.S.  It is good and I commend you if you have removed a few of the false claims of free energy from your website.  You still have some more cleanup work to do there, I'd say:

http://www.panacea-bocaf.org/PanaceaUSA.htm  (as of five minutes ago)

"The main purpose of the Panacea-USA division is to educate the youth in the United States on suppressed  and alternative energies and more importantly have students construct their own  devices based on Chas Campbell free power device.

The first students to build Panaceas proposed devices and the Chas Campbell energy free device will be from the Auburn City School system. The initial class lectures and class construction will be conducted by Dr. Mark Jones, an Auburn Science teacher.

Dr. Jones is also the head of Auburn's Science Olympiad program. His students have won the Alabama Science Olympiad 6 straight years. Once the first device is made, it will be presented to Dr. Steven Taylor and the Auburn University Alternative Energy Program.
 
After this program is completed, once a month, Dr. Jones or Dow Scoggins, former corporate technical instructor and youth motivator, will go to different Auburn City
Schools. Each school will build their own devices.

This project will be an annual event and once the new device is built, the first device will be donated to the low-income homes to help meet their energy needs."

It sure seems like you are building huge castles on foundations of shifting sand.  Noble intentions; horrible strategy.  Here's a hint: Test objectively before you make public claims and big plans, not afterward.

[ashtweth_nihilisti]

Hum i had no idea you were disabled.  However all your comments are not always squeaky clean, and you did make negative statements and and tried to close the book on his device and tell every one to move on despite us not having even disclosed fully his gravity wheel and or done our 2nd  duty cycle measurment. So My mind isn't made up where your coming from sorry, plus i have found the same attitude with your 'contributions' when talking about another device.

Your attitude in my opinion could be better, i did how ever find some objective advice form you and have addressed this on the page/claims so you don't have any thing more to complain about now.
Yes any more delaying will earn you allot of flack. You have nothing more to complain now  so i suggest you keep it that way thanks.

PS, the updated site based on our investigation of the device isn't posted yet.You not looking at the uploaded site yet Hum. Plus i don't know who posted that info on that link of insults, you certainly have the wrong person, my name is not ashtweth dasin any more i dont insult people for no reason, so Hum i would stick to the topic at hand and stop posting irrelevant content.



 

[hansvonlieven]

G'day Ashtweth and all,

When do you think we can have a look at what you have found in Brisbane? At least you are pleased with the way things have turned out, the way you talk. I am happy for you.

Hans von Lieven