Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[FunkyJive]

... i got the impression after watching the first video in youtube that when he stoped the two smaller round magnets it sounded like a small electric motor kicked in and made the big rotor speed up.... i watched it many times, got the same impression each time.

Hi b0rg13

Presuming that it was not a faked video, even a pure-magnet motor would doubtless sound or behave like an electrically-powered motor if it were truly developing power and momentum.

Kudos to those trying to prove or dis-prove either way 


All the best,

FunkyJive

[dean_mcgowan]

.. i get the impression he's a bit of a wiz with the truth (pun intended) ... hehehe

[Bruce_TPU]

Hi Sean,

Your Stator Magnet Holders are looking very nice!   

The only encouragement I would give, is to keep the top of the Stators to about the bottom of the rotor magnets as we discussed yesterday.  It would probably work above the rotor a hair just as well, but not on the same plane.

Fine tuning will be needed as you are well aware of. 

I wish the machine shop milling the three of ours would hurry!  LOL

Warm regards,
Bruce

[Grimer]

hi sean , built a few more of my mk1 stators using 2 separate 4 x5 neos in a wheel. while they all look identical, i have one of the three that does a AGW spin with a tickle. just bear that in mind wen testing and test all stators for performance, some work better than others lol

That's interesting Craigy. One of the things I soon learnt in 4 decades of materials research is that there is no such thing as a uniform material and one always has to check for variability. For example a 1% difference in density between concrete samples can make an 8% difference in strength. I believe one of the main reasons people were not able to replicate P&F's cold fusion results is that different batches of palladium have different properties. P&F got lucky with their batch. It may take quite a bit of fiddling about to reproduce Alan's machine - Anyway, congratulations on getting AGW. That is the first step on the road to Rome.

[sterlinga]

posted at the Steorn forum

CommentAuthoroldHorseface CommentTime1 hour ago edited  permalink
I have build a quick and funky new system where I get a short burst of acceleration, then a sustained speed for 10 seconds, then it slows down to stop in 20 seconds.
My stator is the same one from my Lego setup, but my rotor is 12" in diameter with 12 magnets facing outward alternating north-south. (unlike the OCAL system or my last Lego setup)
I think if anyone is getting AGW lock, you got it happening, you just need to reduce friction and tweek your alignment.
As AL said, the distance between rotor and stator is citical and different for every type of system. Anyone building a test jig should make that distance variable.
I am going out to Burbank tomorrow to get more magnets (disc neos) and try some more things.
I have seen energy from permanent magnets! I think I'm going to cry.

Posted at http://peswiki.com/index.php/OS:MPMM:Replications:AuthoroldHorseface

If anyone has contact with this person, could you ask him to post photos, video, contact info?  I'd like to add it to the above page if that's okay.

sterlingda {at} pureenergysystems.com

[geodan]

Can anyone else get to Steorn? is it down? oooo MIB?

[RunningBare]

Can anyone else get to Steorn? is it down? oooo MIB?

Their server is offline.

[Grimer]

Can anyone else get to Steorn? is it down? oooo MIB?

Down for me too (London). I suspect it's overloaded.

[S_o_E]

Down in the Emerald Isle, too... (Hi Lads!)

[Dirtfarmer]

I don't know where else to go!!!

       (I'll try not to go on tangents...   Howdy all!

         Goodwill,
               -Dirtfarmer

[geodan]

I don't know where else to go!!!

       (I'll try not to go on tangents...   Howdy all!

         Goodwill,
               -Dirtfarmer

I for one am going to try to catch up on my day job...

Hey Grimer,  who won the last post?

[S_o_E]

Feels like we've all popped out of a warp bubble to land balanced on some toadstool in the middle of a swamp...

Funny thing (for me at least) was that they seemed to go down (as near as I can estimate) in the very same minute I attempted to connect - for the first time today...

[S_o_E]

OSPMM could do with links... (don't hit me)...
{edit} The holding page is at once magnificent and hilarious...

[FunkyJive]

I've just tried pinging Steorn's listed primary and secondary server addresses and they're both working fine (ave ping response for each packet consistently just above the 100ms ballpark)...

Pinging 205.178.190.40 with 32 bytes of data:

Reply from 205.178.190.40: bytes=32 time=106ms TTL=235
Reply from 205.178.190.40: bytes=32 time=109ms TTL=235
Reply from 205.178.190.40: bytes=32 time=106ms TTL=235
Reply from 205.178.190.40: bytes=32 time=110ms TTL=235

Ping statistics for 205.178.190.40:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 106ms, Maximum = 110ms, Average = 107ms


Pinging 205.178.189.40 with 32 bytes of data:

Reply from 205.178.189.40: bytes=32 time=114ms TTL=235
Reply from 205.178.189.40: bytes=32 time=111ms TTL=235
Reply from 205.178.189.40: bytes=32 time=109ms TTL=235
Reply from 205.178.189.40: bytes=32 time=127ms TTL=235

Ping statistics for 205.178.189.40:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 109ms, Maximum = 127ms, Average = 115ms


Incidentally, Steorn's .co.uk domain name (they're listed as the registrant) is now listed as "Registration Required" as it expired 5th January.

Registrar:
Key-Systems GmbH [Tag = KEY-SYSTEMS-DE]
URL: http://www.Key-Systems.net

Relevant dates:
Registered on: 05-Jan-2006
Renewal date: 05-Jan-2008
Last updated: 22-Aug-2007

Registration status:
Renewal required.


I would have thought this URL would have been worth hanging onto - particularly as URL's are almost insignificantly cheap.

Hmmm... 

Funkyjive

[geodan]

Good call on moving your stuff out of your Steorn account OC!