Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[CLaNZeR]

Great, but am i seeing here ? Is this a spin down ? or  ?

Thanks CLaNZeR
Bill

Hi Bill

You are only seeing a Spin Down.

I have done hundreds of spin downs over the last year on different projects and even got one wheel to spin down from 100 RPM taking over 4 minutes by using minature bearings.

This Rotor is loose using the 3mm RC bearings and that is all the video shows really.

I am just playing till the proper magnets arrive and hoping by going for the loosest bearings I can, that I will cut my friction losses from the bearings atleast, HOPEFULLY that will allow me to replicate the weird effect we see in AL's Rig happen.

Cheers

Sean.

[CLaNZeR]

Aaahhhh, this makes us all very curious.
What do we actually see here on the stator magnets?
Is one of these clockwise and the other counterclockwise?

Guess you are tweaking now to get this baby running for an hour or so?
(while protecting your ears ;-)

Hi Robbie

I tried for a while flicking one of the Stator magnets the opposite way, but no increase shown by the Laser Tacho.
In saying that the Stator magnets are so small that I would not expect too see it.

Just playing till the correct magnets arrive.

Cheers

Sean.

[jcims]

Attached Video.

FAKE!  No jamming tunes to go with it!

[CLaNZeR]

Attached Video.

FAKE!  No jamming tunes to go with it!

ROFL 

I knew I forgot something 

[magpower]

Sean

First off you do nice work and did a test like yours last night, but after watching the video is did you spin one Stator magnets CCW and rotor CW. I think this is only way this will run. I also wait for my parts and will play.

Wayne

[CLaNZeR]

Sean

First off you do nice work and did a test like yours last night, but after watching the video is did you spin one Stator magnets CCW and rotor CW. I think this is only way this will run. I also wait for my parts and will play.

Wayne

Hi Wayne

As stated 3 posts above I did try flicking the stator magnets, but they are just slid over some brass screws and not secure anyway.
Have drawn up the plans for the Stator magnets but before machining out I await the correct stator magnets to make sure I have got the sizes correct.

Good luck with your replication and get some pictures up!

Cheers

Sean.

[magpower]

Sean

opps didn't read that, but I am using 1" long rectangle blocks and same size dia mags on stator. For now I put them in small tubes so they spin but will rig something tonight so I can spin the one stator. It sure makes a noise mind you. Will post some pics soon but wanted to fix this first.

Best Of Luck
Wayne

[Silvije]

this setup looks interesting!

but is it really slowing down? Can we get a daylight video?
Longer one? To see if and when it stops?

Where can this "backward Nikolatesla" guy be contacted?

thnx!

s.

[Jdo300]

Hi Jdo300

Nice work,
Just a note to add, as ebswift also pointed out and as alsetalokin posted few days back, and from the actuall device pics,  the stator dumper arrangement on the 13 holes is as follows.

D S D E E S E E E E S E E

where D=dumper, S=stator, E=empty

see also http://www.overunity.com/index.php/topic,3871.135.html

I hope this helps for a more accurate replication.

Thanks everyone for the heads up on the positioning of the stators. I corrected the model and re-uploaded the images to my last post:

http://www.overunity.com/index.php/topic,3871.msg68853.html#msg68853

I also have finished the drawings and CAD Docs. In addition to that, I also made some 1:1 scale templates of the base plate and rotor disk for those who want to build this by hand.

I have attached dimensioned drawings of all the parts in PDF format and also the templates for the base plate and rotor disk.

There are also three zip files with CAD drawings of the parts in SAT, IGS, and DXF formats. If anyone has any comments or suggestions concerning the drawings please let me know.

God Bless,
Jason O

[CLaNZeR]

Excellent Jason!

Is it okay ok if I upload these to my site at http://www.overunity.org.uk and setup a plans link?

Cheers

Sean.