Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[j3s]

Has any one thought of or tried to experiment with magnets in a pyramid configuration? at the top 4 poles north south north south.

J3S

[sypherios]

where are you going with this, (an engine,magnet shape, phenomina)??

[j3s]

I have been lurking for a couple of weeks now and experimenting with magnets that i picked up at wall mart as i don;t see any point of investing lots  till we get something workable, and i am trying to figure a way to make an engine or motor that would run on magnets.  These magnets are very small  but i have plenty to work with.  I stacked them end to end and set them in a standing position in the form of a pyramid them i would take a neo magnet and hold it about an inch or so above the top if the pyramid and it tries to move but then it locks. so far no luck but then the top of the pyramid doesn't exactly come to a point and at this point i am trying to figure a way to better design this, and i was just curious if any one else thought of this.

I took a pic

J3S

[j3s]

I just tried it again in a north north south south configuration and it spun around and then the magnets came apart need to set up something that it will hold together I guess

J3S

[kreten33]

Since I'm new here (at least in active role): hello everyone . Now to the matters at hand (since we already handled formalities).
I'm doing a lot of reading lately (in the realm of free energy) and I just finished reading book called Shape Power from Dan A. Davidson. In it he describes an experiment from a guy by a name Les Brown. He has built an replica of the pyramid (I guess a Great pyramid), 30 foot big. I will transcribe the whole paragraph from that book, so you can judge by your self (I hope the author won't be too angry):
He (Mr. Brown) put a counterclockwise (CCW), vortex shape, copper stove wire (with frayed ends) at the top, on the inside of his big  30 foot pyramid to act as an antenna/collector. At the bottom of the pyramid he affixed a wire to a piece of ?'' plywood wound in a clockwise (CW) flat spiral establishing the ground antenna. The center of the wire spiral was put through the plywood and grounded. The outer end of the flat spiral stuck up in the air so it could be attached to the wool thread coming from above. Two inch staples went through the ground coil and through the plywood further grounding the coil. From the apex antenna, he affixed a pure lamb's wool thread and dropped it down the center of the large pyramid. When he went to connect the thread to the spiral at the bottom of the pyramid, a high voltage charge (or whatever type of energy he had connected with) knocked him twenty feet across the floor inside of the pyramid into the wall. This scared him so badly he took the whole thing apart and did nothing else with it.

Well, I don?t blame him  . Seems like he took wrong order of steps. And judging by the sketch in the book he put the vortex coil right beneath the apex, I would put it in the "power" spot of the pyramid (2/3 of the height of the pyramid). But then again, if he would do that, maybe he wouldn't survive. The book doesn't say what material the pyramid was built from, but I guess it was wood. I would plate it with copper or aluminum plates (according to several sources it works better this way. There is another interesting experiment described in this book. Make the pyramid and coat it with copper. Isolate it from the ground. Put the Tesla coil in the "power" point of the pyramid and put the crystal on the top of the pyramid. Energize the coil with at least of 50 kV (more is better) and take the picture of the setup in the dark room (few minutes of exposure time). You should se a double helix of light emitting from the tip of the pyramid. Pretty cool, huh. This experiment was told to author of the book by Mr. Decker, who learned it from Mr. Nelson (University of Wyoming).
And no, I haven' performed any of these experiments yet. But I'm planning to do the first one as soon as time permits it. There has to be a lot of power if grown man is thrown 20 feet away, don' you think?

[j3s]

There is something there trying to tell us i think and i have been thinking about it for the past 2 months and was wondering if a magnet or set of magnets shaped like a pyramid isn't the answer.   How ever maby that book you read about th e man being thrown maybe thats the answer

J3S

[JDFILMS2003@YAHOO.COM]

Hi

My name is Josef Dolezal,

originally from Europe [Czech republic],living for 20 years in USA.

Next month I will try to start on my dream project , to build PYRAMID [1: 10 scale], on my land in San Bernardino [next to Big Bear],[photo enclosed], where I like to do research on different subject as:

 

1] health issue

2] weight lost

2] clarification of ozone

4] seismic activity

ETC.

 



 

If you like to help me , please feel free to contact me anytime via email or ,

at :

PH #  : 727 - 934 4745.

 

Sincerely

Josef Dolezal

200 Grand Blvd.

Tarpon Springs , FL 34689
http://momentum-music.com/Pyramid/ENTIRE.htm


__________________________________________________

[Creekfreak]

This reminds me of something that happened when I was a kid bare with me and you may find a meaning for yourself I have mine ! I was about 13 years old I had a freind in the military and all us kids would hang out at his place becouse he had the badest sound system we had ever seen . So one day we are siting there jaming out and he asks us if we had ever seen a pyramid fly ?? We all looked at him like he was crazzy ya right pyramids can fly thats what we thought at first he proved us worng . The next couple of weeks where intresting we set about to build a pyramid kite he had us all going we worked on it every day one time we asked is this really going to work and he tells us he doesent know he has never dont it before !! But we kept building it not sure if he was bs. ing us or not well the time came to give it try we took it to the beach and to our amazement it took off straight up then turned to its side and crashed it flew though ! We disided it needed a tail to make it fly upright so we tryed it again and it worked but it waesent to our likeing . Back to the table we built another one of better materials and itflew perfect with no tail . You can imagaine the site of a big pyramid flying in the sky it blow our minds and it still does to this day for me . My point is you guys is nothing is imposible yes pryamids can fly beleave me I built one !!

[Duranza]

creekfreak... was that a kite pyramid made from balsa wood?... or a big heavy concrete or sand pyramid?

[Creekfreak]

we built the frame out of dowels not sure if i spelled that right !! The inside was small triangles covered with paper that cought the wind . I was thinking today you could do the same thing with a sphere I may build another one some day but real big but my time right now is very thin with my experiments with overunity and other things it is fun to think about though .Anything is possible if you put your mind to it you are only limited by your imagination the sky is the limit but is it ? I dont think so !!

[r8rchris]

j3s, you can run a motor on magnets, read my post on simple free energy generators.

[Elvis Oswald]

Personally... I've been thinking that the correlation between the dimensions of the Great Pyramid and those of the earth, etc. probably weren't just someone showing off what they knew. 
It might be that the dimensions are for harmonic resonance with the 'schuman cavity' - and it might have been a power station.

If someone with more education than me looked into this... I'd also consider that the pyramid is most likely waaaay older than we're told and so alignments may not make sense if it were built prior to a pole reversal.

Cheers!