Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[unity2zero]

Larry.. looks like you're getting close.. Would Bob be willing to draw detailed plans?  It sure would be nice.  I don't think Bob has his totally self powered as I think he also used an air compressor to help move the weights.  That is fine if you can generate more power than the compressor uses.

Jason

Jason

I think you are right. Bob is using external compressed air as an enhancement for his gravity wheel. The vid photos of his wheel clearly shows an air cylinder on each end of the connected weights. If you check his website, this is what he had written:

"This new engine is the product of years of research, frustration and
perseverance. I found that using the perpetual motion approach limits
the amount of usable energy available. An internal combustion engine
can be enhanced and will produce more power by installing a turbo
charger. This unit will use some of the initial power produced by the
engine, but the end result is far greater. The same process is used
in this unit but because it uses Gravity rather than fuel, the enhancement
system is much different."

He is comparing his flywheel to an IC engine and its turbo charger as an enhancer. Likewise he is using compressed air from an external source to "charge" or enhance his gravity wheel. The big question is whether the wheel would give out enough energy to operate the compressor to give energy back to the gravity wheel. At best, this is an energy "tank circuit".

Cheers

[noonespecial]

Hi Unity,
Here is Bob's own words about using outside power for his unit:

"Hi Stephan. Just thought I would give you a little message and let you know I am back home again. I still go to therapy but things are comming along.
The compressor in the movie is what I was the machine was driving to do some usefull work. The machine wasn't ballanced and the board that is moveing is used as a shelf or small table.
There are no hoses or airlines conected to it."

He has made other comments elsewhere that there is no external power for the machine.

He has stated the air cylinders are only used to cushion the impact of the shifting weights.

BTW, LarryC and myself have been collaborating on a design that we hope to present here in a week or two assuming we are successful.

Regards,
Charlie

[Xaverius]

BTW, LarryC and myself have been collaborating on a design that we hope to present here in a week or two assuming we are successful.

Regards,
Charlie

Hi Charlie, good luck to you and LarryC.  Hope you are successful, will wait to hear of your results.

[LarryC]

Jason

I think you are right. Bob is using external compressed air as an enhancement for his gravity wheel. The vid photos of his wheel clearly shows an air cylinder on each end of the connected weights. If you check his website, this is what he had written:

"This new engine is the product of years of research, frustration and
perseverance. I found that using the perpetual motion approach limits
the amount of usable energy available. An internal combustion engine
can be enhanced and will produce more power by installing a turbo
charger. This unit will use some of the initial power produced by the
engine, but the end result is far greater. The same process is used
in this unit but because it uses Gravity rather than fuel, the enhancement
system is much different."

He is comparing his flywheel to an IC engine and its turbo charger as an enhancer. Likewise he is using compressed air from an external source to "charge" or enhance his gravity wheel. The big question is whether the wheel would give out enough energy to operate the compressor to give energy back to the gravity wheel. At best, this is an energy "tank circuit".

Okay, that is one theory, here's another.

It is based on Bob's statement:

"Once the weights are past the ballance point they accelerate and generate many times their weight that creats the the energy needed. The faster rotation the larger the force. With out the springs and shock absorber it would destroy itself."

So when he stated:

"This unit will use some of the initial power produced by the engine, but the end result is far greater. The same process is used in this unit but because it uses Gravity rather than fuel, the enhancement system is much different."

I believe he is talking about the springs capturing the CF sling force after the balance point and then releasing it at the beginning of the lift phase.

Regards, Larry

[Xaverius]

Okay, that is one theory, here's another.

It is based on Bob's statement:

"Once the weights are past the ballance point they accelerate and generate many times their weight that creats the the energy needed. The faster rotation the larger the force. With out the springs and shock absorber it would destroy itself."

So when he stated:

"This unit will use some of the initial power produced by the engine, but the end result is far greater. The same process is used in this unit but because it uses Gravity rather than fuel, the enhancement system is much different."

I believe he is talking about the springs capturing the CF sling force after the balance point and then releasing it at the beginning of the lift phase.

Regards, Larry

Interesting point, sounds very logical.

[helmut]

Hello
Things develop quite well
Bob has started a new 1th page
In one or two month he will finnish his demomashine

seehttp://www.newsourceofenergy.com/

[noonespecial]

@all

Bob's new demo unit is suppose to be the start of his initial production units. Apparently he was successful in getting a local company to start producing them. I'm hopeful that his website will present clear photos or video of its operation.

Regards,
Charlie

[Xaverius]

@all

Bob's new demo unit is suppose to be the start of his initial production units. Apparently he was successful in getting a local company to start producing them. I'm hopeful that his website will present clear photos or video of its operation.

Regards,
Charlie

Sounds great, let's hope for the best!

[Jon J Hutton]

I am glad this quest for a real green solution will finall be over in a few short weeks.

Jon H.

[noonespecial]

From Bob's website:

"We are preparing for phase 1 of our project and are going to be offering a private showing of the first functioning gravity machine at a secure location later this year, we are asking that only serious investors apply to receive an invitation to come to this special public showing to investors only. This machine represents years of work and planning. This is the only true solution for living in a symbiotic relationship with each other, while helping all the energy needs the world requires at no expense to the environment. We will begin reviewing the applications the 15th of November."

Regards,
Charlie