Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[hartiberlin]

Have a look at this:

http://www.youtube.com/watch?v=OJvFd3pYBnM

Amazing !

I hope Dr. Stiffler will publish the exact circuit.

Regards, Stefan.

P.S:His website is at:
www.stifflerscientific.com

[FreeEnergy]

need a diagram for this 

[hartiberlin]

Seems to be a factor of around 170 x more output than input.

If you apply 2 Volts peek to peek via a 10 KOhm resistor
(if it is high frequency, the 10 pF cap mentioned,might just
be conducting..so I neglected it..) so the input power
is around 400 mikroWatts.

The output power is 2.73 Volts x 25 miliamps = 68.25 milliWatts.

So ouput / input is around 170.

[Super]

The next vid in the next 48 hours will be of great interest. I will post circuits on my web site so that I am covered under my disclaimer for people that try it that do not have the tools or experience to do so. You are a member so check the site...

... can somebody please give me a link to his web site (pm or post) ?

thx, super

[hartiberlin]

Okay, here:

http://www.drstiffler.com/

He also invented a super electrolyzer !

[Super]

Thanks Stefan 

... don't know why, but this guy is a little bit suspect to me,
anyway, looking to find his circuit.

[hartiberlin]

MR. Amos,
he stated, that in series with this signal generator he has a 10 KOhm
resistor and a 10 pF cap.
Assuming the cap will conduct at his used frequency,
there is still the 10 KOhm resistor as a preresistor.
So, 10 KOhm at 2 Volts is 400 mikroWatts,
probably less, beacuse you have to calculate in the duty
cycle.

So do you think you can run the LED this bright with just 400 mikroWatts ?

He stated on his description that this is a blue LED
with 2,73 Volts and 25 mA.

Maybe these are just the normal specs of the LED and
not the actual measured data at the LED, but the LED at least
looks brighter than just driving it with 400 mikroWatts.

[hartiberlin]

Dr.Stiffler just answered to me regarding the choke:

"It is in series on the drain side. It is necessary."

Regarding the ferrite transformer:

"... it happens to cause the core to ring at the 4th (of 3.58mHz) and the
MOSFET starts up as a parametric pump. I adjust the phase with the FE beads
and the circuit is totally AC under its own power. Complicated to view the
thing, but with care is possible. Has a field around it that is quite large.

This is a core thing and causes a parametric feedback."

[callanan]

This is Sweet.

[TheOne]

this is impressive, i would like the plan I try it !