Topic: Nathan Stubblefield Earth battery/Self Generating Induction Coil Replications (Read 156967 times)

Pirate88179 · « **Reply #2370 on:** August 06, 2009, 01:52:47 AM »

From my readings, that is not exactly clear. He did use the pitchblende on his farm where he did a lot of his experimenting. The glow was reportedly coming from his farm so if that had anything to do with it, I don't know one way or the other. I just wanted to make clear that I am of the opinion it was not needed or required for his cells to work evidenced by his success on the road trip and in the river.

I don't think that pitchblende would glow although I am not an authority on any of that stuff. (or much else, ha ha) It is radium ore and is not refined radium. Radium is what they used to paint on watch dials so they would glow in the dark so...we may never know.

Bill

Free Energy · « **Reply #2370 on:** August 06, 2009, 01:52:47 AM »

Sponsored links:

IotaYodi · « **Reply #2371 on:** August 06, 2009, 02:35:03 AM »

Thanks Bill! The glow could come from the electric current going through the pitchblende. Certain chemical compounds will glow when an electric current passes through it.

Free Energy · « **Reply #2371 on:** August 06, 2009, 02:35:03 AM »

Cap-Z-ro · « **Reply #2372 on:** August 06, 2009, 03:34:05 AM »

Maybe a phosphorous angle too...due to the natural affects being manifested.

Regards...

t3t4 · « **Reply #2373 on:** August 22, 2009, 02:39:32 AM »

Greetings,

I'm new to posting here but have been reading over this site for many years now. The problem I find, it's bigger then a phone book and who has time for all that? Just smack me if I repeat anything already suggested or otherwise mentioned, but I can't sit an read for weeks at a time..... I'm a doer, not a reader! The novels are for my wife, not for me,,,, I'll just wait for the movie! But in the mean time, I run my own experiments which is what I want to talk about here. I hope you understand that I don't have perhaps the genetic make up that might allow me to sit through endless reading. I'm half blind now, if I read any more I won't be able to type! Better to quite while still functional.....

I imagine that everyone here realizes this earth battery of sorts is something Nikola Tesla realized in the late 1800's. But there is an anode and a cathode to it all which is not located all in one spot or location. We all know that when we move a magnet across a copper wire that a transfer of energy occurs, right? We can cause or force an electron flow by using a magnetic field which gives us voltage in return via the copper wire. That's basic electrical "generation" which is an incorrect term. It should be named "convergence",,,, not generation, since it's the combination of multiple elements which cause or forced the reaction. Anyway, Tesla had it right, some believe this as fact and the rest fail. He designed and built Wardenclif tower which Is a brilliant concept, but it all worked on a resonant factor.

This tower could pull energy from the earth and the atmosphere otherwise know as the ionosphere, aether, etc. This would have been the ultimate earth battery of it's time. I too have stuck some rods in the ground and got results, but I quickly got to the point of diminishing return. The real power/energy lays between the earth and the outer space. Instead of going horizontal, how about going vertical? I do this now with varied results, but I can recharge any battery for free using the method I described.

Are any of you using areal's?

The interesting thing to me at least, when you go up wards, you find new power/energy. After a great deal of research and experimentation, I know the earth resonates at about 6HZ. The funny thing to me is, so does the human skull. The ionosphere resonates between 106 - 108 MHZ, or so I have read. Tesla was more or less in tune with nature, so for us to duplicate his reported results, we have to do what he did, use what he used and try for ourselves.

Everything he did relied on a resonant factor. We loose almost any possibility of resonance when we use the so-called "chip" due to resistance, power factor, and the fact that a chip can't vibrate well, if any at all. Resonance after all is nothing more then breaching or reaching the mechanical threshold of said component. At least as I see it that is.... A chip won't move, but a tube will. I know it sounds old and antiquated, but to do what Tesla did, shouldn't we be using the same components he used?

Perhaps I just see things differently, but Tesla did all of this at least 114 years ago, so what is taking us so long to catch up? I'm not there yet myself, but I think I'm on the right track.

Anyway, it's just food for thought. But I believe, if you tune a Tesla coil at two distinct but resonant frequencies, you can/could "pull" energy from the vacuum, aether or Ionosphere as I prefer to call it. This term is only negative pressure because there is a lack of pressure, that does not equate vacuum to me. It's like speaking of light when no light exists. You can't have a negative when there is no positive to counteract. So my thoughts: there is no vacuum in space, there is just space and the conditions by which it exists.

I do my best to break everything down, take it apart to examine the counterparts. So the above is only my theory of work already done.

We'll see where this goes I guess, but thanks for listening to my $0.02 worth.

t3t4

Free Energy · « **Reply #2373 on:** August 22, 2009, 02:39:32 AM »

jeanna · « **Reply #2374 on:** August 22, 2009, 05:08:24 AM »

=====
OOPS wrong thread!!
My apologies. This belongs on the stubblefield speculations thread!
I will leave it because is is mostly relevant anyway.
=====

Hmm I wonder if I am getting really close to the mark.

I want to repeat that the earth vibration has been showing itself to be 2.22MHz to 5.5MHz (the 5.5MHz is when I use 2 stubblefields and may indicate a doubling of phase, so 2.22MHz is a sure thing.)

This is NOT speculation or coming from some obscure source, it is coming from the earth battery every day I go outside and look at my probes.

It matters NOT whether the earth battery is 2 simple probes in the earth or augmented by a Stubblefield coil and touching a geodesic dome frame (a kind of ariel).
The voltage and mA changes with those details and differences, but the frequency is the same on a given day on either set of probes.

I find that at least an indication that the earth has a daily pulse.
If more people would join in the datalogging experiment we could see if my numbers in the west usa are the same as in the east usa or in Europe or russia, australia.

welcome t3t4,
This thread was quiet for over a year and just picked up again. I suggest you read the last 2 months of posts to see where we are working now, so you can be in sync, if you want to.

There are a few drawings I have made and some scope shots too.

At the moment MY personal thesis has moved to think as you indicate that the changing magnetic field which is changing without cost to us, is something we can use.
It is, however a changing magnetic field and as such will be beneficial to us only if we use an AC approach. (ac, or pulsed dc over time is the same thing afai am concerned.)

So, please join in the fun.
Make a pair of stubblefield generators (induction coils of a certain type) and lets go for it!

I will add 2 pics of 2 scope shots here from today.
The lower voltage one is the plain eb the higher voltage is the one with 2 Stub coils appended. The frequency setting of the screen should be the same.

jeanna

BTW
If what I said made little sense it may be that the context belongs on the Stubblefield speculations thread... sorry again.

t3t4 · « **Reply #2375 on:** August 22, 2009, 07:26:24 AM »

Thanks jenna for the reply,

I know I should keep reading, but either it's the lighting in this room or the LCD monitor I'm using that is honestly causing me blurred vision or blindness as I call it.. Either way, it's not a good situation.

But now that I have a reply, I will continue explaining what it is that I am doing. But first, I'll start with my results. Yes I can light LED's, but more importantly, I can charge or re-charge any battery, even alkaline batteries!

I do this using a thin piece of wire in the sky. It's just the three pack radio shack wire, nothing special. But I run this through a charge/dis-charge circuit which has netted me over 35 volts DC. All it takes is a simple circuit with an aerial and a ground. I'll get into particulars if any are interested, but I live here in the East in PA, so I am 180* different then you jeanna and that's a good thing in terms of location. What you do I can test and vise versa. But this resonance is the key in either case.

I too see about 5 MHZ through my circuit on my scope. All this tells me is that I am still way too far off to extract any real power. I have nothing resonating properly, yet. But it only takes coils and capacitors to make my apparatus function. The same basic devices Tesla had available in his time. I am beginning to experiment with tubes, but these are fragile and burn out easily. It seems strange to me, but when you get close, you burn things up. The power is there, it's real and it can do real damage!

I did not know this was more or less a dead topic. What I do know is from what I have read throughout this entire forum thus far, when playing with the earth or the sky, we're all simply re-discovering Tesla's work. I can certainly understand where some of the conspiracy theories come from. This is all but 200 year old technology, and we're still to this day dead in the water. Enough already!

This system works on a resonant frequency. You don't have to use coils or caps, but you won't get anything that can do more then simply light up LED's. The joule thief is a good beginning, but this is not where it ends!

Keep your rods in the ground, but drive them deeper. Then erect some sort of areal. I did this on my rain gutters because I have an "L" shaped building. Leave one end open and the other end to feed a capacitor via wire or whatever. Attach the opposite end of the capacitor to a diode leading to ground. Then note your results.

I have gained as much as 35vdc doing this simple experiment. It can also be done in the home. Use the water spicket as ground or, modify a power cable for the ground only, then erect some sort of areal within your home. It works always and kicks the crap out of solar, simply because it never ends! This is something I have been playing with for years now. But my math skills are lacking severely. I'm having a hard time learning how to wind a coil that resonates at my desired frequency.

Jeanna, I know you see 5 MHZ or so on your scope, but keep in mind there is math involved here. What you see is only the beginning, and I can verify here in the east that I too see the same thing. Albeit a wave form I have never seen before, until I touch the oscilloscope probe to my head in the temple Reagen. My wife seems to have higher output then I do, but the point is, the wave form remains almost the same! Try it, a scope is an input device, not an output component, so you have no worries. But I'm sure you will see that you are emitting the same basic pattern as the earth.

By this test/measure alone, I have no doubt we are all from earth, and not from the so-called planet X....

....

I have tested several people thus far and it would seem that us mere mortals exhibit the same basic wave form as the earth itself. Pretty interesting huh?

Anyway, that's enough for now.

Thanks,
t3t4

Free Energy · « **Reply #2375 on:** August 22, 2009, 07:26:24 AM »

Sponsored links:

kukulcangod · « **Reply #2380 on:** August 22, 2009, 11:06:24 PM »

Hey guys

I need help here , recently I traveled to a location where I was able to prove that the aerial/antenna set up from Tesla gives out energy, thing is ......how do we get this to be of use?
Sorry if it is the wrong topic but I was too excited , the joule thief is great with my earth battery by far the best in comparison say with water batteries but then again I am just getting a couple of volts from the joule thief, how do we get a small electric motor to run from it and the earth battery? a regular battery delivers about 6 amps, so no wonder it will light up a lot of stuff , but what about increasing the milliamps of the rods?, the earth battery is great and that kapanatze gen is fantastic but seems really far away due to the elements not identified, anyway take a look at this please :

http://www.youtube.com/watch?v=qd2mSkQ_uog

Free Energy · « **Reply #2380 on:** August 22, 2009, 11:06:24 PM »

jeanna · « **Reply #2381 on:** August 22, 2009, 11:20:38 PM »

My apologies t3t4, I missed this but saw a later one.
I have lots of comments, here are some...

Quote from: t3t4 on August 22, 2009, 07:26:24 AM

... but I live here in the East in PA, so I am 180* different then you jeanna and that's a good thing in terms of location. ...
But this resonance is the key in either case.

Thanks for the confirmation on the frequency. You are the first in 2 weeks of asking!

I agree, but resonance with what?
I think we should be aiming to resonate with what is naturally occurring.
Why would we aim for something a rumor told us?
I see 2.22-2,5MHz from a single wave every time.

Quote

I too see about 5 MHZ through my circuit on my scope. All this tells me is that I am still way too far off to extract any real power. ...

Why does it tell you that?
Why not optimize your coils for that or a subharmonic.
There are many less fast waves that show up.
The slowest wave I have seen is around 22Hz. but never 6Hz. I am beginning to question the 6 and unless someone can put 6 out there for sure instead of from a rumor, I think it is not so.

Quote

This system works on a resonant frequency. You don't have to use coils or caps, but you won't get anything that can do more then simply light up LED's. The joule thief is a good beginning, but this is not where it ends!

Have you used coils? You are using a cap. Why not add a coil? Don't you want AC?

Quote

Keep your rods in the ground, but drive them deeper. Then erect some sort of areal. I did this on my rain gutters because I have an "L" shaped building. Leave one end open and the other end to feed a capacitor via wire or whatever. Attach the opposite end of the capacitor to a diode leading to ground. Then note your results.

So far any time I add a diode anywhere in any direction it kills it. dead.
nothing . as soon as I go inside the diode I can detect something.
Right now I have a capacitor connected to the earth south probe and it is collecting 0.065v egads,. not much!

Are you sure you are not getting a bleed through from your electricity line?

Quote

...probe to my head in the temple Region. .. But I'm sure you will see that you are emitting the same basic pattern as the earth.

I did that on the first day I had my scope, and that is how I was sure my scope functioned. I agree it is heartbeat-like, but ony when I have the 2 NS (Nathan Stubblefield) coils attached. Using only one gets a less complicated wave at 2.2-2.5 Mhz not 5 MHz.

jeanna

Free Energy · « **Reply #2381 on:** August 22, 2009, 11:20:38 PM »

IotaYodi · « **Reply #2382 on:** August 23, 2009, 01:17:05 AM »

The vellman 10 MHz sample rate has a 2 mhz analog bandwidth

The vellman hps 40 has a sample rate of 40mhz and 12MHz analog bandwidth

The analog bandwidth should be higher than the max bandwidth you measure. Trying to look at a signal that’s too fast for a scope’s bandwidth will introduce errors in amplitude and/or time-interval measurements. 5 times the max bandwidth you want to analyze gives greater clarity.
A digital scope with a Horizontal trigger allows you to capture what a signal did before a trigger event and an analog scope doesn't. A digital scope with a good sample rate and bandwidth would be just as good in my opinion.

@ t3t4
If your getting 35 volts your circuitry and setup detail would be welcome.

jeanna · « **Reply #2383 on:** August 23, 2009, 02:14:59 AM »

Thanks IY for that clear info on my scope.

I looked it up and followed up a couple of words etc.

I have stopped reporting the highest curve on the scale because although the peaks and valleys agree with other resolutions, those on that last resolution are like jello instead of mountains,
Now, I also understand why the voltage seems to uniformly drop on the 0.5us/div resolution.
I do not think this has proved my posts to be meaningless; but, I will stop posting any pictures of screens at the 0.5us resolution also. I might look myself, because it is easier for my eyes to determine where the markers should go and thus see if the day is faster or slower than other days.

Thanks for the inspiration to enquire,

And, yes I agree t3t4, please show us some more details.
Telling me what I must do to get your results is fine, but IMO it should follow you showing me what you are doing.

thanks again,

jeanna

Free Energy · « **Reply #2383 on:** August 23, 2009, 02:14:59 AM »

dllabarre · « **Reply #2384 on:** August 23, 2009, 02:21:55 AM »

Quote from: jeanna on August 22, 2009, 11:20:38 PM

There are many less fast waves that show up.
The slowest wave I have seen is around 22Hz. but never 6Hz. I am beginning to question the 6 and unless someone can put 6 out there for sure instead of from a rumor, I think it is not so.

jeanna

I don't have a scope but my EXTECH meter has an option to read a frequency.
Usually I don't get any readings. Someone told me in a post that if the frequencies are changing too fast my meter won't be able to zero in on them.
But certain times of the day I can get frequecies to show up.
I've seen as low as 400mHz - yes milli. I didn't know frequecies would go that low. I've seen frequency readings as high as 1.4kHz.
Usually they are between 300Hz - 800Hz.

I have an EB of copper pipe & zinc rod, spaced over 20' apart, adjusted for the degrees off of magnetic North for my area and adjusted for the angle of earth magnetic waves for my area.

At 8:20PM EST I was not able to get frequency readings.
I will continue to check throughout the day tomorrow and try to determine what time of day I can get readings.

@T3T4 - please post a schematic of your circuit with a list of components and the size and type of each componet so I a reproduce your findings.

Thank you,
DonL

Free Energy

News:

Author Topic: Nathan Stubblefield Earth battery/Self Generating Induction Coil Replications (Read 156967 times)

Free Energy

Free Energy

Free Energy

Free Energy

Free Energy

Free Energy

Free Energy

Free Energy

Free Energy

Free Energy

Free Energy