Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[dietmarhohl]

Hello Friends!

Many thanks for your nice welcome. 

Grüß Dich Stefan. Schön von Dir zu hören. Hoffe der Urlaub
war entspanndend und hat vor allem Deine Batterie ein wenig aufgeladen. ;-)

My greetings into the Forum to everyone also from Robert Calloway (Texas).

He wrote on Di 09.09.2008 14:31 from robertcalloway@eastex.net

"Sir, Yes!!!! The V Track will work in a rotary setup as you have shown.
I have put the video on my site from the guy in Germany. Using more
runner magnets allows easy access through the gate. Great work!!
This may solve alot of energy problems worldwide!!
The magnets will not deplete because they are in the attraction mode.
Keep up the good work. Cheers, Robert"

My special thanks to Robert! ;-)

Hopes the two PDF drawings help to think in new trains.
Yesterday the first drawings were made and ordered for
the production of the VPMM 4.2. rotor.

The other production drawings can be ordered presumably only next week.
The VPMM 4.2. system should be designed as flexible as possible for
the hard examination. Several angular positions must be possible
at the stator in front of everyone.

Think we ALL can see in >= 3 weeks the results.

Greetings

Dietmar, Linz/Austria ;-)
(www.magnetmotor.at)  / d.hohl@magnetmotor.at

[hartiberlin]

He updated his videos with this one:

http://www.youtube.com/watch?v=r3ciT91qO7w


But he still does not show, how the rotor starts to turn.

This what he shows could also be explained by the "spring"
like action of 2 repelling magnets...

In the other videos he shows it running on a table,
but one does not know, if he just spun it up
earlier with a motor... so we have to wait, until
he will show how the motor starts...

He says, we will first make his new rotor and then he will show it all.

Regards, Stefan.

[dietmarhohl]

I have as you know only at the
weekend really time to complete the
VPMM constructions. I´s my hobby. ;-)

See attachment under;
http://www.magnetmotor.at/projekte/vpmm/VPMM_4_2a_s1.pdf
http://www.magnetmotor.at/projekte/vpmm/VPMM_4_2a_s2.pdf

For the appreciated ladies and sirs in the OU-forum
I´ve today completed the test setup. The finished production
drawings are completed on Tuesday and Wednesday.

As, briefly, said here already the aim was reaching
a maximum of flexibility. I hope we can adhere to the
time schedule by the end of September. ;-)

My greetings here to GLanZER (UK) and the other int.
groups like round Eric Vogel (Sweden), Robert Calloway (Texas)...

I am convincedly WE - the OPEN SOUCE COUMMUNITY - WILL
crack this nut together this your late till ends. ;-)

Stay tuned.

Beautiful weekend still ...

your Dietmar, LinZ/AUSTRIA
(www.magnetmotor.at)  d.hohl@magnetmotor.at

[dietmarhohl]

Hello friends!

I have finally got the first parts for VPMM 4.2 a.
See under; http://www.magnetmotor.at/projekte/vpmm/VPMM_4_2a_pics_01.pdf

Thank´s at all!

Dietmar Hohl, Linz/AUSTRIA ;-)

www.magentmotor.at

[professor]

Hello friends!

I have finally got the first parts for VPMM 4.2 a.
See under; http://www.magnetmotor.at/projekte/vpmm/VPMM_4_2a_pics_01.pdf

Thank´s at all!

Dietmar Hohl, Linz/AUSTRIA ;-)

www.magentmotor.at

Hallo Dietmar
Alle Achtung ,Saubere arbeit aber funktioniert das ding?
You have my attention Nice workmanship but will it work?
professor

[Paul-R]

The V-Gate may be open source but I doubt this application of the gate is.

It reminds me of a cross between the TOMI track and the Calloway "V" gate.

[Golden Mean]

Greetings.

The V-gate design is an "attractive" magnetic force motor/generator concept.  I've created a couple of concept animations to show how the magnets are configured.
I'm still trying to find the exact geometric design to get it working, but apparently this Soukup guy has got it working so now I know.  One major difference I see right away is that he has only ONE gate and the magnets nest within each other quite a bit.

Here's the my animations....

http://www.youtube.com/watch?v=8JHb-xJGVUM

http://www.youtube.com/watch?v=MQf0G0R0M5M&feature=related

Peace,
~Golden Mean

[pese]

Greetings.

The V-gate design is an "attractive" magnetic force motor/generator concept.  I've created a couple of concept animations to show how the magnets are configured.
I'm still trying to find the exact geometric design to get it working, but apparently this Soukup guy has got it working so now I know.  One major difference I see right away is that he has only ONE gate and the magnets nest within each other quite a bit.

Here's the my animations....

http://www.youtube.com/watch?v=8JHb-xJGVUM

http://www.youtube.com/watch?v=MQf0G0R0M5M&feature=related

Peace,
~Golden Mean

Will not work
Use FEMM,  if need to see that
GP

[nievesoliveras]

Hi!

If it is true, that would be a good magnet motor!!

Jesus

[Nostradamus2]

Will not work
Use FEMM,  if need to see that
GP

FEMM uses wrong model and it's 2D simulator, any configuration gives zero gain, I have tested many configurations and I know this for sure, better is to do physical testing until proper freeware 3D simulator will be available.

[pese]

@Nostradamus2
done,  long before physical
because it is to see (not by eyes)
to undestand : in front of it
GP

[Golden Mean]

Will not work
Use FEMM,  if need to see that
GP

So, I gather THIS doesn't work... eh?

http://www.youtube.com/watch?v=7tdWkn1m-4w

It actually looks to be spinning on it's own, but I could be mistaken.      What a bummer.  

Peace,
~Golden Mean

[nievesoliveras]

Hi!

The only difficulty I have had with this permanent magnet motors is what is called the sticky point. A spot where the rotor stops and does not move anymore.

I read something about a motor that uses the 1943 formula http://neo.im/media/document/225.pdf

Jesus

[Ergo]

If you have a look at 1:29 minutes into the video you can see a picture where he compares himself to the greatest scientists of history.
This is a very bad sign. It feels very pompous and reminds me of the Crack Pot Index at section 8.
http://www.math.ucr.edu/home/baez/crackpot.html

[dietmarhohl]

Hallo Dietmar
Alle Achtung ,Saubere arbeit aber funktioniert das ding?
You have my attention Nice workmanship but will it work?
professor

Thanks Prof. we do our best. Have a look into ...

http://www.magnetmotor.at/projekte/vpmm/VPMM_4_2a_pics_02.pdf

Dietmar Hohl, Linz/Austria  ;-)
(www.magnetmotor.at)