Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[hansvonlieven]

From Sterling's site:



You're "Lucky"
   
   Mylow   said his brother called him the other day after seeing my story   at PESN about Mylow's having possibly met with U.S. Vice President Joe Biden   while he was in Chicago on Monday.  "What are you doing standing by   Mr. Biden?  How did you pull that off?"  He said.  He   thought for sure that the photo was of Mylow standing next to Biden.  The   resemblance was so close that his twin brother had a hard time believing it   wasn't Mylow, even though Mylow was adamant that I had posted the photo as an   "uncanny resemblance" with symbolic overtones, not as actually being   Mylow.           Something occurred to me last night as I was thinking about all this.  I   can't remember off the top of my head whether it was the NSA agent who came by   a couple of days ago to apologize,   or whether it was one of the agents who was interrogating   Mylow when he went to have his meeting behind a one-way glass wall with   the "very important person from Washington" last Monday, the day VP   Joe Biden was in town, and they then just let him go, despite his   non-cooperative attitude; but they told him, "You are lucky."    Actually, they probably meant it as code for Mylow's bird, Lucky, the one   shown in the video   with the cat batting it, wanting so badly to do more than just play with it,   then finally jumping off the ledge when the curtain is pulled back and the   audience is revealed, bringing to light its nefarious intentions.       Mylow IS Lucky.
   
   He conjectured that the cessation of the bullying could have something to do   with the "important   person" he met with Monday instructing the MIBs to back off.


Brook's bedroom has nothing on this. I think this is really an ad for the new season series of The Young and The Restless!

Hans von Lieven
   

[joe_1001101]

replication...

Key word:  Replication.

Rule #1, We need replications BEFORE getting so serious about a claim.

Thanks,
Joe

[hansvonlieven]

Sed libera nos a mylow   

Hans von Lieven

[Pirate88179]

Sed libera nos a mylow   

Hans von Lieven

Deliver us from evil indeed.

Bill

[hansvonlieven]

Deliver us from evil indeed.

Bill

Well, evil is actually malo but it's close, very close 

Hans

[Digjam]

http://www.youtube.com/watch?v=MMdwL7bBmGE

http://www.youtube.com/user/magneticmotor1

He's BAaaaaaaaaack 

Took less time than I thought it would

[chrisC]

http://www.youtube.com/watch?v=MMdwL7bBmGE

http://www.youtube.com/user/magneticmotor1

He's BAaaaaaaaaack 

Took less time than I thought it would

Hey, give the man credit when credit it due! This video is more and more believable. Right? Well done MyLow!
Now, will you please allow some people to witness it independently. Please?
Thanks

cheers
chrisC

[Digjam]

He had 4 or 5 comments on the video
All basically said"well done". He's already deleted
the comments.

[chrisC]

He had 4 or 5 comments on the video
All basically said"well done". He's already deleted
the comments.

Yes I saw that too. He's probably still pissed off and I wish he would be a little 'thicker' skin. Take some heat but show them what you really had. Apparently, he chose the other option and that's his prerogative, I guess.
Well, MyLow, wish you more success. You should not brand me a 'thug'. I'm not jealous of your achievement, like you know who!

Take care.

cheers
chrisC

[Mannix]

Well done Mylow!

I hope you do some more but understand that you probably wont.

I hope that some serious effort will be made as you suggest but unlikely from this fine gathering here where everything is impossible.

[zapnic]

okey he has first witnesses in this new video 
i believe its real thing

[Pirate88179]

Wow!  I just watched the video.  I told Mylow that if he had posted this type of video in the first place, there would have been a lot less problems.  I still think he needs to have some others see it in person but after watching this, I have to say I believe he has done it.  I will say it again, I think he really has done it.

Bill

[markdansie]

To be fair that is one step closer.to a decent video.
However until its has been independently validated doubt will always remain.
Hopefully this will be done in the near future.
Then there will possibly be the degaussing issue to test.

Mark

[The Nephew]

I'll say it again Mylow, thank you for posting yet another video.
As for the skeptics, there will always be people that doubt, even after your glass table top demonstration. I fell it coming already, what if he had wires going up through the frame work of the table to the bearing shaft. What this, what that, it will come.
Only thing I have to say to you about that mylow is, don't sweat it bro.
I'm sure some of these skeptics are God Loving Christians, who swear by the bible, go to church on Sundays. But never met the man himself...But yet will take another mans word that God created the world in 6 days and rested on the seventh. But, for whatever reason they believe PPM is impossible, without having it validated???
Go figure
Keep up the good work Mylow
The Nephew

[Cloxxki]

I'll just add my response that this is getting more and more impressive.
Thanks Mylow for posting that.

What puzzles me is that Mylow states that after finding patience for 30 years working on this, he actually doesn't understand the magnetic forces driving his "thing", while he does seem to be the only person to get any kind of layout to work at the "first try" almost.
Might Mylow be sitting on some huge magnetic earth line (lack the Eglish word)? Nah, if that had been a factor he'd gotten these machine to work in the first 29 years.
I want to believe, but all the drama and half-compliance...I am protecting myself by remaining a sceptic. All have been betrayed at some point in our lives, and it's not fun to be the object of a fraud's laughter.

Even before I went on reading about this sort of OU contraptions, I did think of similar setups, fully expecting them to work. Surprised to now learn that it was never 100% done.

Mylow's video is about as good as video's come I suppose. Next step in global acceptance (and extra congrats to Mylow and Howard Johnson's family, will be a sceptic taking the thing apart, assembling himself, and of course a 1:1 replication. The machine is simple. If there's more to it that what we see, then Mylow is a whole lot smarter than he's letting us see, and replications won't work without his special "ingredient". Some sort of treatment to the metals.
I'll echo one thing posted before : the stator seems to have little friction with the table/cupboard surfaces yet remains in place while it's accelerating the rotor. I don't understand that. Or would it have JUST enough friction to not push itself out of alignment?

I believe this video as much as a video is to be believed.
Mylow seems to get any setup working, he can make another. Give this machine to someone that can be trusted. At this point, Sterling would not be it I'm afraid.

I'd like to see how much work such a rotor could do while remaining a contant rpm. The bearing friction is really, really low. There is some air being displaced. But how much can this machine be loaded before it shuts off? Supposing this indeed is real, I'd expect it to have an optimum rpm resulting in the highest load to be drained from it.