Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Custom Search

[sparks]

There may be a few of us that are lost so I offer this explanation as to what a displacement current is.  The magnetic field responds to two types of currents one is from moving charge carriers and the other from virtual particles flowing in a polidial electric field.  The sum of these two gives us the magnetic field distortion about a conductor.  If we put a compass between two charging capacitor plates it will show a current until the capacitor charging stops changing the q state of the plates. The magnetic field appears to be displaced inside the field between the capacitor plates.  This magnetic field is generated not by charge carrier movement but by the change in the polarization of the dielectric field between the plates.  The crossection of a conductor can be viewed as a capacitor plate.  As the q of the crossection changes very quickly or the termination voltage rises this displacement current precedes any electron or positron movement.

[Loner]

Nice Question, Grumpy, but I think you already know the answer.

To put that question into what I am working on;  How do you create a displacement current, without using standard electrical current as the source?

Or am I "Dumbing down" this thread by asking that....  I'd like to know.

[sparks]

   Interesting question Loner.  If solar coronal mass transfer coming from the sun slapping into magnetosphere causes a compression of the magnetosphere the ions in the ionosphere will now accelerate or spiral along moving field lines.  This disruption causes a change in the electric field between Earth's surface and the ionsophere.  Just one field change I can think of that would charge or discharge the Earth to atmosphere q state.

[giantkiller]

This fits some parameters:

Since a Rogowski coil has an air core rather than an iron core, it has a low inductance and can respond to fast-changing currents. Also, because it has no iron core to saturate, it is highly linear even when subjected to large currents, such as those used in electric power transmission, welding, or pulsed power applications. A correctly formed Rogowski coil, with equally spaced windings, is largely immune to electromagnetic interference.

[BEP]

Now, how do we create the displacement current region and rotate it?

I suppose we could try the !Wilson-!Wilson effect  (In many older programming languages the Bang or exclamation point signified the 'NOT' operator or inversion of logic)

If it was possible we would wish a truely rotating magnetic field(around its own polar axis). If we had one we could just wrap a coil, in a poloidal way and center it on that spinning magnetic field. No back drag - the ultimate answer for a N-machine - all that good stuff.

If you spin a dielectric disk in a static magnetic field you have potential build on the disk.

So, negate the logic.

Apply a potential to a stationary dielectric disk to create a rotating magnetic field (a real one - not another pretend one like in motors)

Even if someone tries this they should understand this potential you are applying must be the same as a displacement current. In displacement current the magnetic and electric(properly said 'dielectric') are not out of phase from one another.

[Grumpy]

Vacuum is already a dielectric, even when polarized.

If polarization of the vacuum causes some sort of contraction or expansion then we can move the vacuum itself.   Going out on a limb, the expansion or contraction has already been verified by the work or Francis Nipher and others.

It does not have to actually move, just appear to move, so the "change" must propagate.

I can not find the reference now, but displacement current "spin couples" to a magnetic field - vertical - north up - compare to rotation of electrons in a magnetic field.

Since the earth/sun/solar system magnetic field is variable and fairly weak, we need a static solenoidal field.  This will increase the energy of the dis-cur through spin coupling.

We can collect with capacitive plates like Wilson, or we could use a toroid if we put a twist to the field.  A radial magnetic field within the region of the displacement current and the static dc field, will add a moment to the rotating region, causing a twist.

Recall that Tesla produced explosive radiant events with fast changes in polarization.   He mentions that the coils must be of low self capacitance and high self-inductance for magnification of potential.  Makes more sense after reading those recent papers.  Brooks coils have these features and have a sort of square cross section.  A series of Brooks coils in a circle, with a dc field in the same space, should produce our monstrous shockwave of displacement current, and sequentially triggering these coils should produce our rotating region of displacement current.  then we just need to time everything to couple together and cause the electrons to move in the conductor.

Polarization current (displacement) is proportional to the rate of change of the polarization.  So, HV is "required" for maximum polarization and a fast switch, such as a avalanche diode or transistor or a saturable reactor would work great in this case.

[BEP]

and sequentially triggering these coils should produce our rotating region of displacement current.

Sorry, I can't agree with this quoted part. Triggering magnetic fields in sequence will spin a motor rotor but not a static potential. The only thing that can change a static potential into a current (moving charge) is to spin the disk or the magnetic field containing the disk.

From there it is the fault of Lorentz.

So, the setup I described would look identical to these little toroids.

[giantkiller]

I have a set of those.
The white wires go out to the rings. On mine I have windings on them as the larger wire goes around once of the spool. The idea here is to bias the bigger loops and shock that field with the smaller coils.

Agreed?

[Grumpy]

Sorry, I can't agree with this quoted part. Triggering magnetic fields in sequence will spin a motor rotor but not a static potential. The only thing that can change a static potential into a current (moving charge) is to spin the disk or the magnetic field containing the disk.

From there it is the fault of Lorentz.

So, the setup I described would look identical to these little toroids.

No.  the static magnetic field is just that "static".  Pulse the long coils in sequence as the displacement current is not steady.  Lorentz does not apply here.  Move the potential (polarization) not the magnetic field.

If you increase the spin of electrons, then you have increased their energy.  Something has got to give to balance the system.

Just like what happens along a wire, except with a twist from the mag field to kick the energy up a little.

Tesla is smiling...



It will work.

We've talked the talk.  Do we dare walk the walk?

[BEP]

@Grumpy

I'll try the concept on a previous build. No mods required except operating sequence and signal adjustment. My life is still in a suitecase now.

@GK

Did you get anything from that one or are you just teasing ?

[sparks]

    If a repolarization of a field exceeds c then your input energy has been transformed into mass.  Not alot of mass just a tiny amount.  Mass = e/c2.  Say it took 10nanoseconds of 1kw to do it but the mass reverts to energy in l nanosecond it will release 10kw of power. Now you collect this 10kw now at your disposal and impose it on the same field for 10 nanoseconds and this time you create a little bit more mass which again converts back into energy in 1 nanosecond.  Releasing 100kw.  No need to do this for many more cycles before your mass becomes part of the equation.

[BEP]

    If a repolarization of a field exceeds c then your input energy has been transformed into mass.  Not alot of mass just a tiny amount.  Mass = e/c2.  Say it took 10nanoseconds of 1kw to do it but the mass reverts to energy in l nanosecond it will release 10kw of power. Now you collect this 10kw now at your disposal and impose it on the same field for 10 nanoseconds and this time you create a little bit more mass which again converts back into energy in 1 nanosecond.  Releasing 100kw.  No need to do this for many more cycles before your mass becomes part of the equation.

Understandable but 

[giantkiller]

There has been a plethora of info put forth in the last days here. I am glad to see this thread staying on track. It has occured to me that the kick pulse achieved by the double pulse protocol falls into these labels. The shortness of the pulses sets a magnetic shock / surface charge through the dielectric space while disallowing the diffusion to take place, i.e. low amperage and no heat. The usage of the space charge in a bigger loop creates a larger aperture. We magnetically disconnect and reconnect. We all should know what this does by now. Pursue Kunel, Bearden MEG and Magnacoaster.
@ALL,
With that in mind we can notice the coil winds that many have done look just like or are similar to TPU coils or the magamp type coils on top of one of the open TPUs and the 2 center coils in the SM17. Agreed? Then what I say still holds true. Bias the bigger loop and shock it with a smaller control coil. Like what I have in the my pic.

It was either BEP or wattsup that stated what if the mapamp type coils are the TPU guts and the rest is all show? That being the case then my pic is the guts and the larger aperture. No problem cutting the outer loops, right? HaHaHa! Does SM ever cut the guts? I think not...
@BEP,
It was you that that stated minimal output from pulsing the low inductance all copper build. I additively say then just make the collector bigger in diam and shock only a small portion of it. This is what I am up to next with that pic I posted. No teasing. It has been brought to my attention that the pervayers of the TPU info cannot say certain terms, submit pictures, or discertate designs. Have we not seen this? Missing spellings, vague design terms and no pics. Then I have found my niche and will entertain this next build from inventory to bench. My current inventory screams to get pulsed.

Also,
My Solfegfgio Harmonic Intermodulation Transmitter is cased up and ready to ship to Mexico. 3 things: If the device gets confiscated, it is not allowed in the ball court, I don't return;  then guess what that means? Same nightmare as Tesla and SM. I have no gag order and do not fear. Just as a side note: There are 7 Solfeggio notes and 7 Chakras that are also labeled as notes. This information is very ancient. Cayce stated that 'One day all medicine will be sound'. Just going down the road less traveled.

@Grumpy

I'll try the concept on a previous build. No mods required except operating sequence and signal adjustment. My life is still in a suitecase now.

@GK

Did you get anything from that one or are you just teasing ?

[innovation_station]

gk there are 7 charaks .... 

for HUMANS ... 

all 7 are located inside the body ... 

for the non humans ... there at the min 36 

so ... 

RE/RA's is the 8th ...  and it is desert glass.... 

im up to 20 stones and have it almost down!!!!   

so the first 7 are earthly stones most likely the first 12 stones ... the second set of stones is plannetary ...  meaning the zoidac ... then the next set is universal ... or maybe STAR STONES ...

this all corolates to the charaks ...  the human body and the universal soul ...  when you get into ballance you will be able to love....

i have been digging into this more and more as my reserch progresses ...

also there will be harmonic entanglement with in the stones ... 

the egyptian staffs head peices engery belts and sheilds .. are all apart of the system ...

the tesla sheild will allow teleportation to be a safe reality... the pureity of the stones will hold your soul engery intact.. 

like you said gk your a reiever ...   

ist!

and the tesla sheild to me seems to be a crystal amp ... to strengthen your ora ... and set up a protective barrior to your phyiscal body ..

nuff bout this stuff this is the tpu..... not merlins magic ...     or arthers sword 

altho it is ALL 1 IN THE SAME ...

if you want to know more this river runns soo deep it is why santa wears a hat .. why the cristmas tree is used ...    amoung many many more things ... i care not to mention ..

my job here being i was on the superviser 814  days .. as i was told .... is to ballance both sides ...

this is why im 14 ... there are not many that are in this same spot ..  and i never asked for it ... it fell in my lap why ...

?

anyone else know who i was in my last life ... ?   i do ... this life and the REBIRTH ... HUMMMMM

[sparks]

  Bearden's sea of energy does exist and the Universities have verified his claims over and over again working with the Casimir effect.  The vacuum is loaded with oscillations of field polarization but due to the scale of the field and the speed of repolarization the happening is not radiated but stays in the field.  This accounts for the 90percent of the missing mass from the Universe that only radiates gravity and some blackbody radiation and occasionaly a brand new galaxy or Universe.  Mass is pretty well described as a standing wave field.  The only way to convert mass to energy is impose an oscillation into the standing wave field that a either causes a total collapse of the swf which would be bad or b mixes with the oscillations so that the oscillations within the swf couple outside the field. The space the oscillations now reside in is expanded.  This expansion of the field of oscillation alters the time to space ratio needed to contain the swf and the energy contained within the swf is now radiated.  This manifests as the original input frequency diverging into two side band frequencies with the same amplitude in each side band as the original input.  The vacuum oscillations acting as a freely generated intermediate frequency in a superhetrodyne process.  Keelys sympathetic vibrational motor.  Tesla's coax coil capacitors.  Below is how I think I can generate some emps efficiently.  Not really sure at this point what to do with them.