Uni platform for Tariel Kapanadze and Akula and all other Chubindze............what does it mean?
well we start to understand Tesla,
=============================================================================
At first to say I reserve to myself nothing at all.
I do not care
All credit you may direct to :
SR ,Tiger,Arunas Akula TK and so on from that group there is only Tiger and Arunas who voluntarily contributed ......Arunas because he is like me.
Akula delivered ,because he is intelligent and he knows that there is no other way however he is trying to protect his invention......
I told him that go over TK application is next to impossible....... so what difference does it make if akula is wealthy with patent or without he is rich anyhow
for these who are not familiar with patent law. :
Even if TK did not get the patent his art has priority over later failings and his patent application is damn good done.
What is so special about bifilar and caduceus?
-it resonates at any frequency of its bandwith, as part of circuit,
-fields cancelation
The magnetic field created by one winding is therefore equal
and opposite to that created by the other,
resulting in a net magnetic field of zero
(i.e., neutralizing any negative effects in the coil).
In electrical terms, this means that the self-inductance of the coil is zero.
not exactly true
Now you put rod inside and play with capacitance
Caduceus used in Luthuania Experiment was just sort of bifilar but of equal geometric parameters of impedance reactances.
so say caduceus = to bifilar used by akula= to Wesley's 2012 200W experiment as I was using caduceus winded in Lithuania.
It was not about finishing it but checking phenomena I got confirmation That was all I was in need for.200W nicely ON
I have had spark gap as others did
SR have used ferrites. say bifilar on it and HV coil and pickup coil
His light bulb was an active load!!( not less and no more)
SR stated that:
till now I'm is not able to get more.
TK has had some of lightbulbs not working but actually some sections of lightbulbs that he was switching on sequentially
He is a master of impedance match...after switching voltage divider that was doing the trick of need for additional active load.
Also he used active load
Akula has used active load and he could not have one more or one less light bulb.
He is brilliant young man but knowledge about that was shared long time before by Tiger and Arunas.
So what is or might be common to all of the inventors form the above?
1.active load
2.pump requesting balancing dis-balance from the ground or counterpoise ....... yes it can work without ground but not without counterpoise.......... while electrons are being pumped up
3. ferite or ferrite substitute. that at the same time is a part of HV potential electrostatic medium at which its presence makes capacitive reactance needed by the pump.
That is the hart of the device.
4. Tesla who was first in it and run the car of it. over 100 years we have been used on the big scale by" powers"
Can it be iron .sure it can......
Can it be cooper rod inside( thick one)? I do not know...... it might..........
left hand side of schematic is your tesla coil.............. right one is your bifilar..............
where is load it is NOT 100 ohm!!
that is only for your oscilloscope to measure something if you will.
what to measure was shown by Akula on his videos.
There is no need for the donut!!
pickup coil is the one that is connected to light bulb and that circuit is directly responsible for disspating part of energy from the ground that is coming as request comes.
There is constant time delay that does not give time for the signal to die.
nie davaj impulsu zatuchat poslie transformatora
that was the only knowledge that TK ever told me.
DO NOT LET IMPULSE DIE/
CATCH IT RIGHT BEFORE IT START TO DIE.
exactly what Arunas was saying
and not
what Akula was implementing.
however Akula exactly knows what is and what is not.
As much as I have respect to him he needs the time to do his things and he needs to have public attention .(security and patenting....)
so another words carrier is low frequency say 50Hz
modulating signal is up to 2MHz+ ................ Lithuania experiment yoke!!!
Ok I'm tired for now just got back..............
Please
understand that ferrite and no-ferrite experiments have in comon capacitive reactace of coil in presence of electrostatic field.
just try with iron rod inside
and fallow what I gave you in points in previous post
Wesley
PS. Please do not attack me as I have nothing to hide ..well something I did not tell but that is my "insurance policy"
Questions asked: Wesley's response
dimensions, - not important flexible
proportions, - as in any of akula working models flexible
distances, - critical square root distance law experimentally adjusted or adjusted by voltage regulation
angles, - parallel including inside rod/ however if one central Tesla is surrounded by receiving coils proceed as John is advising in my video (angle)
orientations, - as above.
winding pitch & thickness, - as Akula from his description
turn count and direction, - as Akula from his description just skip electronics that is all
insulation,
amplitudes, -PVC pipe and pickup coil HV insulation wire
voltages, - primary of tesla 12V secondary about 25KV is ok ( Danger!!!)
currents, - as frequency of generation is fixed the self-resonance of circuit must be lower than frequency of generator.That means Capacitive character of coil( HV and Low current)
frequencies, - his first device work at 10KHz however do what I say up there in the post....
waveform shapes, -sinus for carrier , spark will do the rest ( draw envelope around spark spectrum to find center) it works as self regulating sort of PLL. That is what TK likely used.
phases, - as Akula said but in HV spark regulator you will not measure phase but feel phase!!
material compositions, - PVC pipe , rod thick rod of iron, ferrite or ferrite inside aluminium tube with the slit.
fields, - if you fallow John advice that you in new territory but results might be shocking you with NMR response uhhhhh..........etc...
SPARK GAP and voltage on SPARK GAP IS YOUR MAIN frequency regulating technique.!!!!!!!!!!!!!
Ground not needed but it will not work without counterpoise.
length of wire to the counterpoise is critical.
so might be as well ( actually it is) the length of the grounding wire
some of you than might ask the question how come akula device was shown without any ground wire
and was working.
Yes think about counterpoise as balance.
find that very next day ferrite was no longer good.
energy must come from somewhere and be converted to any other usable form of energy
The only free energy you can get is one that does not require to be paid for.
if the device is mounted in the car than car body
is your counterpoise and there is a need for small
coil with capacitor to tune counterpoise to the device
the same way as it is done with
Ham radio 2m antenna or HF antenna
http://www.youtube.com/watch?v=BPWjzLTsjhg
minute 5:33 look at small coil
if the device is mounted on say 72nd floor than 2x2 meters plate ( aluminium ,iron etc.) will do the job.
That also can be piece of ferrite or iron with coil winded on it but any destruction even your body will de-tune device.
Another words the more mass- geometrically (not in weight!!!!) the better is stability of the device.
Simple: You need terrain/real-estate .
If counterpoise is used that is insulated from the real ground it would work but it will have its own potential other than ground
and might be dangerous( in this form of device only) for the person that is touching ground and counterpoise at the same time.
Physical ground is absolutely different animal than counterpoise or ground acting as counterpoise
wesley:
So Akula used in
http://www.youtube.com/watch?v=3xUjJjBUdwE
coil stack of ground wire hanging from the side of his device like it was just rolled up..
good assumption but dead WRONG......... !!!!!!!!!!!!!!!!!
that was intentional...
He can not cut the wire!!!!!!!!!!
or he could but detuning would be than needed.
Active load is the load ( lightbulbs) where impedance of the load is directly responsible for energy decipation in process of sustaining oscillation..say one lightbulb is off than device is off.
So how come Akula shows working device and than screwed another light bulb into?
Yes he did so after all other lightbulbs have been hot already
